STL Key safe is a good solution to store a high amount of the keys with burglary protection GRADE I according to European norm EN 1143-1. The safes are tested in Geman testing center ECB-S.
Clearly arranged storage system with the pull out walls is providing an ideal solution for properties with the need to store a high amount of keys in a safe way.
Series of the STL safes provides storage solution between 980 to 3240 keys. All of the safes are available with key lock or code lock.
|Productnaam||STL 1680 - 1680 keys (265 L) - Burglary Grade I - Code Lock|
|Kleuren||Grafietgrijs (RAL 7024) / Lichtgrijs (RAL 7035)|
|Leveringstijd||Bel voor leveringstijd|
|Gewicht - (kg)||240|
|Testmethode tegen inbraak||EN 1143-1|
|Testcentrum tegen inbraak||ECB•S Duitsland|
|Cash Rating||GRADE I|
|Capaciteit - Liter||265|
|Capaciteit - Sleutels||1680|
|Hoogte - Extern (mm)||1200|
|Breedte - Extern (mm)||650|
|Diepte - Extern (mm)||530|
|Diepte - Deurhandvat inbegrepen (mm)||542|
|Hoogte - Intern (mm)||1.120|
|Breedte - Intern (mm)||570|
|Diepte - Intern (mm)||415|
|Deuropening - Hoek||180 Graden - interne scharnieren|
|Scharnieren||Rechterkant (standaard) - 10% extra betaling voor scharnieren aan de linkerkant|
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|